In order to make your personalized futon bunk bed that is certainly safe for your needs as well as your loved ones, you may need to get a pair of futon mattresses of the same size, ready the material to be utilized for your bunk bed frame, construct the bunkbed framework, attach the futon frame to the bunkbed frame, install a ladder to your bunkbed, put on a finish to your newly made futon bunkbed, and try out your bunkbed before actual use.
Acquire two futon beds of exactly the same measurements
To begin with, you should get a couple of futon bed sets of matching size. Although you do not need construction materials for this, you can look into website bobcat, if you need them in the future. Figure out the lengths and widths of each and every part of the futon bed to make sure they are the same measurements so to have the dimensions you’ll need to construct the support frames for your futon bunk bed .
Ready the lumber to be used for your bunk bed frame
To be able to install your futon mattresses and build them into a bunk bed, you should prepare the material and try cutting it based on the sizes of the 2 futon beds to be utilized as the frame. The frame should ideally include bed headboards, foot planks, as well as posts. Ensure that you also have extra materials for the ladder to be attached later on.
Build the bunk bed framework
Immediately after cutting your lumber, you can build the bunk bed frame by drilling correct holes in your posts to install your bed headboards, foot decks, and also sideboards. Assemble the parts of the bunk bed framework using bolts, nuts, and washers and make sure they are tightly secured.
Affix the futon casing to the bunk bed framework
As soon as your bunk bed frame is ready, you can attach your futons frames to it. Drill holes in the head as well as foot panels adequate enough to contain the bolts which come with the futon frames. You may also utilize a completely new set of bolts, washers, and also nuts that fit in the holes of your bunkbed structure posts. Immediately after attaching both structures to each other, tighten the mounting bolts to ensure that your futon bunkbed is certainly firmly attached.
Put a ladder to your bunkbed
Complete a ladder that will allow you to get to the top bunk. Essentially, the ladder must be attached near the base of the top bunk bed’s sideboard right down to the sideboard over the bottom bunk. The ladder may also be installed at the foot panel of your upper bunk down to the foot board of your lower futon bed if you prefer. The ladder has to be installed using either stainless steel brackets or even by nailing both ends of the ladder to the side or foot boards of the futon bunk bed.
Apply a finish to your newly assembled futon bunk bed
After you have tightly affixed the ladder, as well as the futons to the frame, even out the bunkbed decks by using sand paper. Put on primer to the surface and let it dry. Finish your bunkbed frame with paint, varnish, stain, as well as sealer and leave it to dry.
Assess your bunk bed just before actual use
Remember to test your brand new bunk bed first prior to actual use, particularly when designed for use by young children. Look for wobbles that may need the tightening of mounting bolts, as well as other feasible defects which may lead to your bunk bed to give at anytime.
After following these easy steps, you will be ready to enjoy a futon bunk bed that is safe, fun, and convenient for you and your family.